Shenzhen Nuobashi Trading Co.,Ltd

Storage temperature: -30℃~80℃
Operating temperature: -20℃~60℃
Operating voltage: 11.1V and 14.8V
No-load speed: 0.26sec/60° and 0.19sec/60°
Quiescent current: 10mA and 8mA
Stalling torque: 84kgf.cm and 110kgf.cm
Stalling current: 5.5A and 6.5A
Peak efficiency torque: 16.8kgf.cm and 22kgf.cm
Appearance size: 64x33x73mm
Casing material: aluminum
Gear material: 1 metal plastic gear and 3 steel gears
Bearing type: ball bearing
Angle sensor type: analog potentiometer
Connector and cable type: JR
Material: PVC
Length: ① 24.5±1cm (black, red and yellow) ② 20±1cm (red and black)
Pin definition: ① 12V- ② 12V+ ③ Signal ④ Vcc(5V) ⑤ GND
Weight: 309g
Output shaft: 15T
Gear virtual position: ≤0.5°
Output shaft screw: M3x6
Motor: DC brush
Control characteristics Control signal: Pulse width modulation
Control angle default: ±60° Programming: Maximum 175°
Neutral position: 1500μs
Dead zone width: ≤1μs
Pulse width range: 900→2100μs
Waterproof performance: IP65
High level voltage: 2V-5V
Low level voltage: 0.0V-0.45V