Baoding Ningxin New Material Co.,Ltd.

Alumina Ceramic Foam Filter for molten aluminum filtration

Alumina Ceramic Foam Filters mainly for filtration of aluminum and alloys in foundries and cast houses.With the excellent resistance to attack and corrosion from molten aluminum, the filter can effectively remove inclusions, reduce trapped gas and provide laminar flow,and then the filtered metal is significantly cleaner.Cleaner metal results in higher-quality castings, less scrap, and fewer inclusion defects, all of which contribute to bottom-line profit.
-reduce scrap related to inclusions,
-reduce costs related to inclusion defects,
-increase productivity with higher extrusion or rolling speeds
-increase casting flexibility with easy alloy changes
-no holding metal.

FEATURES:
-Superior dimensional tolerances
-Stable chemical composition
-Highest filtration efficiency
-Excellent strength
-Resistant to corrosion attack by molten aluminium and alloys
-Beveled edges and compressible gasket

SPECIFICATION:
Working Temp ≤1200°C
Porosity 80~90%
Compression Strength (Room Temperature) ≥1.0Mpa
Volume Density ≤0.5g/cm3
Thermal Shock Resistance 800°C to room temperature 5 times

Application
non-ferrous and alumina alloys, hightemperature gas filter, chemical fillings and catalysis carrier etc.

Whole range of porosities from PPI 10 up to PPI 60 (PPI = pores per inch).
Filters are available in all common sizes:7x7x2", 9x9x2",12x12x2", 15x15x2",17x17x2",20x20x2", 23x23x2".Other sizes can be customized upon request.