AEON LASER

Advantages of the MIRA7

Faster than others
With a Customized stepper motor, high-quality Taiwan Linear Guide Rail, and Japanese bearing, the MIRA7 maximum engraving speed is up to 1200mm/sec, acceleration speed up to 5G, twice or three times faster than ordinary machines on the market.
Clean pack Technology
One of the biggest enemies of laser engraving and cutting machines is dust. Smoke and dirty particles will slow down the laser machine and make the outcome bad. The Clean pack design of MIRA protects the linear guide rail from dust, reduces maintenance frequency effectively, gets a much better outcome.

All-in-one design
All of the laser machines need an exhaust fan, cooling system, and air compressor. The MIRA7 has all these functions built-in, very compact, and clean. just put it on the table, plugin, and play.

Class 1 Laser Standard
The MIRA7 machine case is fully enclosed. There are key locks on every door and window. The main power switch is key lock type, which prevents the machine from those unauthorized persons operating the machine. These features make it much safer.

Mufti-Communication
The MIRA7 was built with a high-speed multi-communication system. You can connect to your machine by Wi-Fi, USB cable, LAN network cable, and transfer your data by USB Flash disk. The machine has 128 MB of memory, LCD screen control panel. With off-line working mode when your electricity is down and reboot machine will run on stop position.
Effective Table and front pass-through door
The MIRA7 got a ball screw electric up and down table, steady and precise. Z-Axis height is 150mm, can fit in 150mm height products. The front door can open and pass through longer materials.

Focus easier
The MIRA7 can install the newly designed Autofocus. The focus for the laser can’t be easier. Just a press with the autofocus on the control panel will focus automatically. The autofocus device height can be adjustable manually very easy, and it can be installed and replace very easily, too.

Strong and Modern body.
The Case is made up of a very thick galvanized steel plate, which is very strong. The painting is powder type, looks much better. The design is much more modern, which fits seamlessly in a modern house. The LED illumination inside the machine makes it shinning in the darkroom like a superstar.

Integrated air filter
The environmental problems for laser machines are more and more attracted attention by customers. In the process of engraving and cutting, the laser will bring heavy smoke and dust. That smoke is very harmful. Although it can be driven out of the window by the exhaust pipe, it did harm the environment badly. With our integrated air filter specially designed for the MIRA series, it can remove 99.9% of the smoke and bad smells made by laser machine, and it can be a support table for the laser machine as well, further, you could put material or other finished products on the closet or drawer.